Mar 18, 2011 at 08:31 o\clock

Classification of filling machine

Principle of liquid filling machine can be divided into pressure by  filling machine, pressure filling machine and vacuum filling machine.

Pressure filling machine

Is a liquid at atmospheric pressure by the weight of the filling. Timing of such water filling machines are divided into two kinds of filling and constant volume filling applies only to non-gas filling low viscosity liquids such as milk, wine.

Pressure filling machine

Is higher than the atmospheric pressure in the filling can also be divided into two types: one is the liquid storage cylinder pressure and bottle pressure equal weight by the liquid into the bottle and filling, as such pressure filling; the other is the liquid storage cylinder pressure is higher than the pressure of the bottle, the liquid into the bottle by the pressure, high-speed production lines and more using this method. Pressure filling machine for filling with liquid gas, such as beer, soft drinks, champagne and so on.

Vacuum Filling Machine

Is lower than the atmospheric pressure in the bottle under pressure filling. The filling machine of simple structure, high efficiency, the viscosity of the material to adapt to a wider scope, such as oil, syrup, wine, etc. can be applied.

Oil filling machine

For filling all kinds of oil, such as cooking oil, lubricating oil, peanut oil, soybean oil and so on. This class is for oil filling machine specially developed filling materials filling machinery, enabling unmanned operation manual operation and flexible configuration.

Note filler plug

Such bottle filling machines are widely applied to medicine, food, cosmetic, oil, pesticides and other special industries, may be filling a variety of liquid, paste products, such as disinfectants, hand sanitizer, toothpaste, creams, all kinds of cosmetics and other items .

Liquid filling machine

The new horizontal design, light and convenient, automatic pumping material, the larger the viscous paste to the hopper feeding.


Vertical Liquid Filling Machine

Switching between manual and automatic functions: When the machine is in "automatic" state, the machine according to the set speed, automatic continuous filling. When the machine is in "manual" state, the operator pedal to achieve filling, if the hold has been slam, you also become automatic and continuous filling of the state. Anti-drip filling system: When filling the cylinder up and down movement, led bulkhead. Material cylinder, three parts connected by handcuffs, without any special tools, handling cleaning is very convenient.


Mar 10, 2011 at 07:03 o\clock

Summary of the bottle filling machine

In the bottle filling machine according to the invention provides an improvement over existing technology. Spin the bottle received in a vertical extension, and the lowest by one or more of the General Assembly, they may be washed, injected in the upper half annular pressurized air dry half of the revolution the revolution rotation. In this time, open the bottle mouth is below the level, so water automatically. When the bottle reaches more than half of the lower semicircle, their mouths open, so the Fed will retain their level of material which, in the present invention, the machine, and then filled with bottles before turning them back to the lowest part of the path. When they arrived at the point of discharge after filling the bottle conveyor line.


Through a fixed aperture plate filler valve connected to the supply of materials will be filled with the bottles, such as distilled water. By looking at three o'clock in the clockwise rotation viewed the General Assembly on the status of the filler, the fixed valve plate into the aperture by rotating the discharge of fill material begins to fill holes and flow through the tube between the spokes of the bottle has reached the semi-circle their mouths in the above levels, which can keep the Federal Reserve who is becoming the lower half of the bottle.


In the bottle filling machine, including the valve assembly according to the invention with a fixed valve plate and rotating with the rotating cup, the Council and the spokes and around the cylindrical bottle rotating drum separator pad, which address the General Assembly rotating installation. Fill tube to expand more than discharges from the holes around the rotary valve cup in addition to the interval between the radial spokes on a pair of respective adjacent bottles.



Assigned fixed valve plate to the bearing surface of a curved groove, the rotary valve cup against the corresponding bearing surface bears into the opening. Arcuate curved path into the expansion slot corresponding to the cycle path in which emissions rotary valve cup hole location, and this arc-shaped slot extends from about three o'clock five o'clock position. Therefore, distilled water filling machine or other filler material filled into the flow through the aperture to the illustrations in the three o'clock in the arcuate groove extends to the five-point position, whereby the discharge holes are facing arcuate groove between the three positions O 'clock and five point position, because the rotation of their past, to fill the bottles they are connected to the material.

Sep 7, 2010 at 09:44 o\clock

Supply Double-stage vacuum Transformer oil Regeneration purifier and oil Filtration and oil Treatment machine for service Transformer

by: asgmachinery   Keywords: Oil, Filling, machine

Supply Double-stage vacuum Transformer oil Regeneration purifier and oil Filtration and oil Treatment machine for service Transformer


Why need Treat Transformer oil?


In order to achieve optimal dielectric strength and insulating performance inside of transformers and circuit breakers, dielectric oils must be kept absolutely clean and dry. Substation Maintenance Contractors and Utilities need a rig that can quickly and reliably process transformer Oil Filling machine to meet or exceed very stringent specifications, so Oil Filtration Systems, Inc. designs and builds the most effective, durable, and user-friendly Hi-Vacuum system on the market today. Special engineered design features maximize the water extraction rates of our systems, and top-quality components and workmanship ensure years of maintenance-free operation and performance.


How to treat Oil Filling machine manufacturer?


The series ZYD-I Double-stage vacuum Transformer oil regeneration  plant is designed for the following application:


I. Degassing, dehydration and filtering impurities of Oil Filling machine


II. Remove acidity, sludge, free carbon, other soluble oil decay products and discoloration


III. It can vacuum Oil Filling machine manufacturer to transformer, vacuum dry transformer and on-line operation transformer .


IV. It is mainly used for purifying the insulating oil, transformer oil, mutual oil, switch oil, dielectric oil and so on. The standard ZYD-I system is designed for processing Oil Filling machine in workshops, in storage tanks or directly in transformers (energized or de-energized transformers).





1. This machine is high effective and portable, which is very suit to operate on line. Also it can be used to dry the electric equipment and input the Oil Filling machine manufacturer into the electric equipment under the vacuum state.


2.The machine adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate.


3. High vacuum limiting vacuum less than 5pa, working vacuum less than 35pa.


4. High absorption speed, absorption speed power more than 333L/Sr.


5. Duplex 3D stereo-evaporation technology, eliminating the liquid water very effectively.


6. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effect.


7. Distinctive removing impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.


8. Carbon fiber infrared heating system that can make the Oil Filling machine contains zero sum of ethyne after treatment.


9. The oil of any grades can be treated on line at the working site.


10. The Automatic oil purifier model is installed with PLC (Programmable logical control  system) which can control the equipment automatically to every stage of its process and ensure its process and ensure its safe operation on site and on line without human supervision.


11. Can be operated both on-line and off-line.

Aug 30, 2010 at 10:14 o\clock

JiangSu ASG Packaging Machinery Group Announces 2010 Interim Results

Product diversification to achieve growth in packaging, sales and production volume for non-carbonated drinksChina's leading beverage packaging machine and PET bottling company, JiangSu ASG Packaging Machinery Group, today announced its interim results for the period ended 30 June 2010. During the period, ASG Packaging Machinery Group reported stable sales and production volume.

    As of 30 June 2010, the Company's total operating income increased by 8.39% to RMB 1.6 billion. Operating profit decreased by 12.32% to RMB 146 million. Net profit dropped 19.09% compared with the same period last year, to approximately RMB 111 million. Net profit attributable to shareholders dropped 18.63% compared with the same period last year, to approximately RMB 78.82 million. Mr. Gary Guernier, Chairman of ASG Packaging Machinery, said, "China's beverage industry continued to grow in the first half of 2010. However, the current year's widespread and severe cold weather significantly affected beverage consumption. Additionally, we have not yet entered the peak season for beverage. These factors resulted in our slower profit growth, with the effect in carbonated beverages being most apparent. However, we have seen higher growth in bottled water, tea, fruit juice and other non-carbonated products, underpinning the long-term business prospects for the Company."

    ASG Packaging Machinery Group is regarded as the leader in China's beverage and non-beverage packaging machine industry, providing safe and environmentally friendly beverage and non-beverage products. Its product quality, R&D, cost control, customer service and employee training have also been well received in the industry. Coca-Cola, Pepsi and Uni-President are its major customers. Mr. Guernier concluded, "The Company will take proactive measures to combat the negative impact due to bad weather in the first half of the year. In particular, we will vigorously diversify our services and products, most notably expanding our packaging, sales and production volume for bottled water, tea and fruit juice. We will also increase our marketing efforts for non-carbonated beverages. And we will continue to build further on our core strengths, which include continual efforts to cement our established partnership with customers, actively upgrading our service quality, expanding our production capacity, improving our products design, fully utilizing our production facilities, and persistence in stringent cost control. We are confident about delivering stable, solid business growth."
Jiangsu ASG Packaging Machinery Group was established in 1982. It is primarily engaged in the production and marketing of PET bottling, PVC and OPP labeling, and it is also engaged in drink refilling. Jiangsu ASG Machinery is one of the largest PET bottle manufacturers in China, and the first company supplying PET bottles to Coca Cola in China. The Company has over 80 production facilities and an annual production capacity of over 5.5 billion. Its products include PET bottles for carbonated soft drinks, drinking water and beer. It has received various honors and awards at the national and provincial level. The Company was listed on the Shenzhen Stock Exchange (Main Board) in 1996, the first entity in China's beverage packaging machine manufacturer to be listed.

Aug 10, 2010 at 05:35 o\clock

Status of the world's tea beverage packaging

A sense, is a noble drink tea, but also a high-tech products. This is because the functions of tea and tea beverages by itself determine the process requirements. Tea contains catechins, caffeine and other ingredients, both endowed with the tea to a specific functional role, but also to its extraction, made it difficult to save. At present, modern technology has defeated many tea production technology problems, while the packaging and preservation has become the manufacturer must attach great importance to the key. According to statistics, the world has been in use in tea packaging (1) glass bottle, (2) metal cans, (3) Paper plastic composite brick Tetra Pak, (4) PET bottles (PET, PEN), etc.. The three major domestic metal cans, Tetra Pak and PET bottles (PET). The following three types of packaging on the current use of the advantages and disadvantages for an analysis: 1, three-piece tinplate cans Most domestic tea producers have built a three-piece can production lines, such as in Shandong Hi Dragon Oolong, Hebei sun rose iced tea, oolong tea, etc. Shanghai fudi. Specifications such as 320,350,385 ml. The advantages of metal cans processing adaptability, low loss, excellent barrier properties, packaging and printing colorful, but the cost is high, filling tea internal coating requirements more stringent. The quality of these teas are mostly caused by uneven within the coating. Environmental treatment is also difficult. And because of resources, market and financial, technical conditions, restrictions, national industrial policy still does not allow a lot of promotion. But the three cans in the cities there is a demand. 2, paper / aluminum / plastic composite Tetra Pak (TetraPak) Taiwan Province, a popular form of packaging. Uniform black tea in China such as Jiangsu, Big Mac tea, green tea, etc. Hangzhou top the new. The main specifications are 250,300,380 ml. The use of multi-layer composite materials, packaging wall and tea were sterilization, aseptic filling technology, CIP cleaning systems, products long shelf life, packaging costs are cheaper. However, complex equipment, high cost, the domestic production line is still not more than full capacity, processing and packaging shape very similar, intuitive products, poor sales of the domestic market has not busy, I believe that such a package should be for the tourist market and the primary and secondary students and attention to keep prices low. 3, PEN, and heat-resistant PET (PEN) bottles PET (PolyethyleneTerephthlate) is a polyester material pressure from the United States, Pepsi-Cola Company in the 70's the first onto the market. As the cheap, transparent, airtight and good compressive strength, global reach 2 million tons in 1995, accounting for 37% of the global soft drinks market. But?? Cloud anything about this incident flattering hip way back Cave curse turbulent Angeles Ai Jiao Biao gown complete line of loyal? Jin Kong Glaze? 0 or more, the risk of neck softening and volume contraction, so non-carbonated beverages must ultra high temperature sterilization (UHT ), after cooling in aseptic filling and sealing under the conditions, which on filling the environment and equipment technology for a strict requirement. Japan Nissei (ASB) machinery manufacturing company in the early nineties to market HSO Series Heat PET (PEN) bottle production equipment, production process that is common to add a PET oven heating process, shortening the original billet heating pipe time and increase the crystallization temperature, thereby enhancing the crystallization rate and crystallization effects, so hot filling PEN bottles can be achieved, that is 85 ~ 90 under the conditions of tea beverage packaging machine filling. Undoubtedly simplify the tea hot filling beverage packaging machine production process, ensure product quality to provide favorable conditions for tea. Japan's Ito Park, Asahi, Suntory and other companies have achieved better economic results with heat-PEN. However, equipment cost is too expensive (a production line is about 1.5 million U.S. dollars), the bottle price is more than ordinary PET bottle 1 times more daunting. 4, PP and BOPP bottles  To find China's national conditions, inexpensive, unique style, and is suitable for hot tea beverage packaging machine equipment, Nagano, Japan in 1996 I found FONTIER cooperation with the United States using the new? Two-way stretch blow molding technology, by Hong Kong Guy Carpenter Co., the company introduced to the Asian market and EFB1000R EFB2000P two models of two-way stretch blow molding machine. I am a professional writer from Cheap On Sales, which contains a great deal of information about disposable boot covers , fertility test kit, welcome to visit!