Products

Automatic intermittent rotary motion in general form in the center of the turntable unit, installation 6-14 rpm rotation, 8 times per revolution, stay a short time, transported to the capsule filling machine turret turret of all the stations at each station a short time to stay , broadcast capsule, sub-sac, filling, eliminating automatic garbage bags at the same time, lock bags, bags, cleaning mold and other services.

Steps

1, press the green button in the "power switch" power.

2, slowly adjust the "vibration strength adjustment knob" clockwise rotation, which is "vibration support" the United Nations as the vibration plate finishing first, hand-to-order plates, seat of your pants to adjust the vibration intensity to a certain time.

3, will be installed into the capsule shell powder, "Pharmaceutical Machines shell finishing panels installed" about 300 or so in each place. Into the "capsule cap sorting disc" capsule cap, about 300 or so. Finishing the disc under the top with plexiglass plate small funnel-shaped, the hole diameter and the corresponding number of digital capsule diameter bored hole. At this time capsule shell stability of vibration table plate to move slowly into the hole from the particle board stand.

4, about 30 seconds, the capsule shell powder, capsule caps that fall into the hole, open. In the case of individuals opening down, capsules can be set to gently press the cap can be set out.

5, the handheld devices to access the capsule shell level (drawn at the end of this figure, like a circular plate with random), in the wholeGently push the internal management of the lower plate, finishing powder, capsule shells fell on the installation disk to disk hole, then remove the access panel. The same method, remove the Capsule capsule cap plate cap.

6, can be prepared in advance of the base area of ​​500 × 500 mm, four of about 10mm square plate powder height, both sides of the built-in powder, capsule shell powder will be installed in the side access panel plate powder level. Plexiglass box, and then randomly assigned to take cover load powder capsules with powder into the box, a shovel, scraping the border, you can take the powder, and scrape off the excess powder.

7 and the capsule cap plate (diagram drawn for panel hole side), then the board in the capsule cap random set, where the holes for placement. Flip board cover capsule, opening down the capsule, a set of equipment has been installed in the capsule shell pink, access panel, easy to have a bit nesting holes.

8, the capsule will be nested into the "capsule cap molding board" plate and cavity, the hand pull down, "it" and put in place, do not care too much force, because the positioning mechanism under the control of pressure altitude. Remove the cover plate joint capsule, into the blister packing machine  completed. To cycle the next board.

The instructions described in terms of subject matter follow focus of the graphical user interface elements respond to focus events. In that context, a program may contain elements of a number of key areas including the ability to accept keyboard input for each. When an element receives keyboard focus, information content is updated to indicate that the element or keyboard focus. Since then, the focus areas, the focus may be changed to include the element of the range than the other. When you change the focus back to the scope of the focus range, including the elements, the information may be used to the keyboard focus of the elements.

At least one computer-readable storage DIY steadicam used in the system, with a variety of visual elements in the access control, it can receive in response to user by the navigation key, the computer readable storage medium, which contains, by the computer to execute the instruction set, the implementation of cycle between the different areas of focus method, the method includes: access to the content page, you can focus from the keyboard to select multiple controls, multiple controls are arranged in a range of visual focus of a number of trees, of which each of a number of key areas define a visual tree of sub-tree, where each sub-tree consists of a cycle is scheduled in response, by controlling the full set of navigation keys, and one of the top of each sub-tree element contains multiple attributes, including at least: a property associated the scope and focus of their control, and property definitions: content page, the focus is on the focus of their range, the currently selected control; and content of the pages, the focus is to control key does not belong to their respective scope, focus is the last within the range of options control, in which the contents of the multiple controls on the page to keep their own property, including at least: a keyboard focus property, which controls only the first page of all the contents of the keyboard focus to promising the true value of the property, and a focus on property, only within the scope of each key can have a focus on all controls the real value of the property and accept a second choice of scheduled navigation key response: Change the focus from the scope of a first group of control to the second a focus range of a second group of control.

Update the scope of the first top-level elements DIY steadicam merlin on the information to determine the final selection of the control; updated second key element in the top range of information to determine the currently selected control; change the past Select the keyboard focus to control the value of property has a false, while continuing as the focus of a truly valuable property; and change the focus of the currently selected keyboard has a real value of the property and a second scheduled to return to the navigation keys to select the response The first focus of the range and automatically using the property to finalize the selection of the first control key and set the keyboard focus has been to determine the final selection of the control and also change the keyboard focus past the selected property is a real value.

Blister packing machine from the functions are divided into two categories: one is the display, protection, landscaping products for the purpose of transparent series; packaged products are mostly commodity, placed or hung on the supermarket shelves, the selection of materials and more better for the transparency of the PET and PVC. Products include: Masks, blister card, blister card blister, double blister sealing, double fold and transparent blister pack boxes.

Another is the protection, segregation, shock, for the purpose of foil trays, plastic boxes series, packaging products, mostly electronics, IT, industrial parts and cosmetics, the materials used are mostly PS (color, antistatic and flocking etc.). Products include: trays, the occasional, plastic boxes, flocking plastic, antistatic plastic, conductive plastic pallets, trays and so on.

This combination of two types of capsule filling machine, but also produce a new type of packaging: the bottom cover and sandwich packaging, which sets the underside of the "surface" of the PET material with better transparency, "the end" by PS material, both play container protection, and play a show the visual effects.

Source：http://www.china-pharmaceutical-machine.com/news/item_5618.html

Parts cleaning

1, the capsule filling machine normal working hours long, on a regular basis in direct contact with the drugs, pharmaceutical batch or disabled when the replacement time is longer, but also to clean up.

Lubrication

2, the machine drive mechanism under the work surface should always appropriate to add oil (fat) to reduce wear on moving parts.

Check the oil

3, the main drive gear oil every month to check a second, less time when fuel, 1 oil change every six months; dial-station indexing operation of 3000h per box to replace a second lubricating oil, based on experience of 90 commonly used # oil.

Safety Clutch

4, the safety clutch in the pharmaceutical machines overload protective effect, the clutch should not slip when the normal load, but may also be due to prolonged use of the phenomenon of slipping, slipping phenomenon occurs when normal use, you can circle the clutch nut more tightly to achieve the normal operation of the machine can ensure that protective purpose.

Vacuum separator

5, the vacuum separator vacuum system for filling in hard gelatin capsule play in the main module, the capsule up and down and suction cap, the role of separation, if the capsule does not cap, separated, will not be filling up. Each machine running a wheel station, the machine spindle 1 week, vacuum separator under the action of the cam on the upper and lower motor 1. If the capsule cap and body separation is not smooth, check the vacuum separator on the plane and the plane under the module, the space between the gap of the vacuum system through the General Assembly to reach the vacuum cap, the required physical separation of the vacuum ( 0.05MPa or so), the gap is too small and prone to talking back to the module deformation. When the vacuum separating the location of the need to be adjusted, turn the main motor shaft with a handle so that the vacuum separator to the highest position, release lever machines under the table at both ends of the lock nut (a nut for the L, a right-lateral nut), and then rotate the lever to adjust the height of the vacuum separator, and then lock nut, turn the main motor shaft with the handle until the appropriate tests so far. Vacuum of the vacuum panel of the blister packing machine table read out through the high vacuum may be appropriate to open the vacuum control valve, the vacuum is too low can turn it on or off when the vacuum valve. Vacuum system filters regularly open to clean out clogged dirt, a vacuum system to ensure adequate vacuum.

Drive chain

6, the drive chain should be checked 1 week, and add the appropriate amount of grease, it is necessary to be re-tightened. When the chain is too loose to be re-tightened, you should move the tensioner to adjust, but can not open the chain can not be separated from the chain sprocket, so as not to disrupt the movement of the entire organization in order to prevent the occurrence of kinematic interference.

Drivers decide to purchase new machinery and by the A&M technology Co. Ltd. biotechnology company in the so-called new products more special Boniface specific projects.

Initially, there will be only a few drugs, clinical trials, research and development, so that a small, but fully automatic capsule filling is necessary.

GM is also an important factor when choosing A&M technology Co. Ltd ceiling, so when Brian suggested pre-arranged to accommodate the new capsule filling machine liquid filling machine an attractive proposition.

A&M technology Co. Ltd powder not only for the current research project, but its future products will be granular or liquid in a machine with a flexible form.

Brian said that maintaining a high level of customer service is proud of this installation is no exception.

Machinery is now fully operational in A&M technology Co. Ltd, the company quickly gained a huge advantage.

Manual capsule before quickly using a variety of special Boniface cover powder filled aerosol filling machine filling.

Filled with a special material endemically enteric capsule, which can ensure the right point and the drug release in the precise location of the control patients.

The capsule is sealed before painting, and their use in order to more particularly blister packing machine, protecting enteric coating.

This is an important part of the process, because any defects that may affect or cause the release of chemical leaks, both will damage the effectiveness of new drugs.

Not only in clinical batch has production in a very short time limit, but it also provided an accurate income and capsule filling evenly.