Electrolytic capacitor Variants
Unlike capacitors that use a bulk dielectric made from an intrinsically insulating material, the dielectric in electrolytic capacitors depends on the formation and maintenance of a microscopic metal oxide layer. Compared to bulk dielectric capacitors, this very thin dielectric allows for much more capacitance in the same unit volume, but maintaining the integrity of the dielectric usually requires the steady application of the correct polarity of direct current else the oxide layer will break down and rupture, causing the capacitor to fail. In addition, electrolytic capacitors generally use an internal wet chemistry and they will eventually fail if the water within the capacitor evaporates.
Electrolytic capacitance values are not as tightly-specified as with bulk dielectric capacitors. Especially with aluminum electrolytics, it is quite common to see an electrolytic capacitor specified as having a "guaranteed minimum value" and no upper bound on its value. For most purposes (such as power supply filtering and signal coupling), this type of specification is acceptable.
Suntan offer all kinds of Tantalum capacitor .
